MANUALE UTENTI

USER'S MANUAL
D.M.S. software
1.4 U.C.A. packages
If you bought your UCA programs at the same time as STRATO 2000, you
will have been given the equipment already enabled to these applications.
It is not necessary to install the UCA packages.
If you decide to order an UCA package after installing STRATO 2000:
1. Contact the licensed supplier and tell him your unit’s serial number.
2. The supplier will contact Villa and in a short time the requested
package will be delivered.
NOTE:
You will find your equipment’s serial number on a label under the
STRATO 2000 keyboard:
For every UCA exam package you have bought you will get:
- a CD ROM with a letter containing three codes, necessary for
installing new exam programs
- any additional hardware accessories.
Now you can proceed with installing your UCA packages. To install UCA
packages:
1. Start the STRATO 2000 DMS program following the instructions in
chapter 2 "Start of the program".
2. Install your UCA packages according to the procedure described in
paragraph 5.2 "Installation of new application packages".
DMS SOFTWARE Strato 2000 4
(Rev. 0)