MANUALE UTENTI

USER'S MANUAL
Patients’ File
Page settings
•
•
Horizontal Dimension: insert the measurement in millimetres of
the horizontal side of the sheet you are using
Vertical Dimension: insert the measurement in millimetres of
the vertical side of the sheet you are using
• Margins:
–
–
–
–
Upper: insert the measurement in millimetres of the distance
between the upper margin of the sheet and the upper margin
of the first row of labels
Lower: insert the measurement in millimetres of the distance
between the lower margin of the sheet and the lower margin
of the last row of labels
Left: insert the measurement in millimetres of the distance
between the left margin of the sheet and the left margin of the
first column of labels
Right: insert the measurement in millimetres of the distance
between the right margin of the sheet and the right margin of
the last column of labels.
NOTE:
Laying out the "Margins" parameters, the system helps you by
highlighting in red the meaning of the selected fields in the
schematisation of the label sheet.
WARNING:
If the margins of the label sheet are smaller than the ones pre-set for the
printer, the labels may not be completely printed.
In this case it will be necessary to modify some parameters in the label
layouts.
Label settings
In the "Label settings" sub-window you define all information
concerning the label format you wish to use in the printing.
• Number of labels:
– Number of columns: insert the number of the label columns
contained in your label sheet
– Number of rows: insert the number of label rows contained in
your label sheet
• Label Size:
– Width: insert the measurement in millimetres of the width of
each label
– Height: insert the measurement in millimetres of the height of
each label
DMS SOFTWARE Strato 2000 30
(Rev. 0)