MANUALE UTENTI
MANUALE UTENTI
MANUALE UTENTI
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
USER'S MANUAL<br />
D.M.S. software<br />
1.2 Hardware installation<br />
Once you are sure about your preliminary requirements, you can proceed<br />
with installing the hardware.<br />
The only operation necessary is the connection of the serial cable<br />
between STRATO 2000 and your PC.<br />
Before connecting the cable, be sure both STRATO 2000 and PC are off.<br />
The STRATO 2000 serial connector is situated on the left side of the base<br />
of the equipment.<br />
Connect one end of this cable to the connector and the other to a serial<br />
port of your PC.<br />
Usually PCs have two serial ports named "COM 1" and "COM 2". Take<br />
note of which of the two ports you have connected the cable so as to set<br />
the software in the right way, when requested.<br />
The connectors at the two ends of the cable are completely the same and<br />
interchangeable.<br />
DMS SOFTWARE Strato 2000 2<br />
(Rev. 0)
Change language