27.03.2014 Views

Intel® NetStructure™ 6000 Switch

Intel® NetStructure™ 6000 Switch

Intel® NetStructure™ 6000 Switch

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

C H A P T E R 5<br />

<strong>Intel®</strong> NetStructure <strong>6000</strong> <strong>Switch</strong> User Guide<br />

gated/static#add route 192.27.2.3/24<br />

gated><br />

gated>config<br />

gated#add static<br />

gated#static<br />

gated/static#add route [192.27.2.3/24]<br />

gated/static#di<br />

static<br />

--------------------<br />

default<br />

route[192.27.2.3/1]<br />

gated/static#<br />

To add a default route<br />

1 Type add default, then press Enter at the prompt.<br />

gated/static#add default<br />

2 Type default, then press Enter at the prompt to configure the<br />

default component.<br />

gated/static/#default<br />

3 Type di to display the attributes required to configure the static<br />

route.<br />

gated/static/default#di<br />

if: 0.0.0.0<br />

gateway: 0.0.0.0<br />

pref: none<br />

type: 60<br />

The interface and gateway need to be defined.<br />

4 Type set if ip_address, then press Enter to set the interface.<br />

gated/static/default#set if 192.25.1.1<br />

Note The brackets are not used with the set command to configure<br />

IP addresses.<br />

5 Type set gateway ip_address, then press Enter to set the gateway<br />

address.<br />

gated/static/default#set gateway 192.255.25.0<br />

201

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!