27.03.2014 Views

Intel® NetStructure™ 6000 Switch

Intel® NetStructure™ 6000 Switch

Intel® NetStructure™ 6000 Switch

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

A P P E N D I X A<br />

<strong>Intel®</strong> NetStructure <strong>6000</strong> <strong>Switch</strong> User Guide<br />

set spantree portcost port_number { auto | cost_value }VID<br />

changes the Spanning Tree bridge port cost associated with the<br />

port specified by port_number to the value specified by cost. If<br />

Independent VLAN Learning (IVL) mode is set, the command<br />

is displayed as set spantree rapid { on | off } VID, where VID<br />

is a VLAN identifier. To set the mode to Independent VLAN<br />

Learning (IVL), type fdb mode ivl.<br />

Example<br />

To set the port cost for Gigabit Ethernet port 3:<br />

<strong>6000</strong> <strong>Switch</strong>>#>set spantree portcost 3 10<br />

set spantree portpri port_number value VID<br />

sets the bridge port priority to the value specified by value for<br />

the Spanning Tree Protocol. If Independent VLAN Learning<br />

(IVL) mode is set, the command displays as set spantree<br />

rapid { on | off } VID, where VID is a VLAN identifier. To set<br />

the mode to Independent VLAN Learning (IVL), type fdb<br />

mode ivl.<br />

Example<br />

The following command line, sets the priority of port 3 to 1:<br />

<strong>6000</strong> <strong>Switch</strong>>set spantree portpri 3 1<br />

set spantree rapid { on | off } VID<br />

Rapid reconfiguration quickly designates a new root port for a<br />

root port that is on a failed path. If Independent VLAN<br />

Learning (IVL) mode is set, the command displays as set<br />

spantree rapid { on | off } VID, where VID is a VLAN<br />

identifier. To set the mode to Independent VLAN Learning<br />

(IVL), type fdb mode ivl.<br />

If rapid reconfiguration is set for an STP domain, it cannot be<br />

turned on for a PVSTP domain.<br />

Example<br />

<strong>6000</strong> <strong>Switch</strong>>set spantree rapid on 1<br />

(NO MESSAGE)<br />

277

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!