Intel® NetStructure™ 6000 Switch

A P P E N D I X A
Intel® NetStructure 6000 Switch User Guide
Example
6000 Switch>#>show sysfails
There have been no system failures.
If one fan has failed, the output is as follows:
6000 Switch>#>show sysfails
Fan Failure at Tue 6/8/99 12:59
Fan 2 had failed, and is still failing.
Other messages include:
Fan fan_number had failed, but it is currently working.
Temperature exceeded high water mark: degrees C on time
Board in slot slot_number has failed number times in a row and is currently DIS-
ABLED.Will attempt to enable it on the next reboot.
Board in slot slot_number has failed number times in total.
Slot slot_number DISABLED due to insufficient power.
The switch was shutdown since the temperature (degrees C) was too high.
All media boards were disabled since the maximum shutdown period was reached
on a fan failure.
show syslog
displays the current parameters for the syslog feature. This
command is available in privileged and non-privileged mode.
Example
6000 Switch>#>show syslog
Syslog
: Disabled
Syslog IP address : 0.0.0.0
Log user commands: Disabled
Log all output : Disabled
show temperature
privileged command that displays the chassis temperature.
Example
6000 Switch>#>show temperature
Temperature is 34 degrees centigrade.
show timeout { current | default }
displays the current or default time out interval for a Telnet
session.
Example
6000 Switch>#>show timeout current
Login current timeout interval is 15 minutes.
6000 Switch>#>show timeout default
Login default timeout interval is 15 minutes.
295