Intel® NetStructure™ 6000 Switch

C H A P T E R 3
Intel® NetStructure 6000 Switch User Guide
2 In the Media Port column, click the media ports that are to be
aggregated or grouped together.
3 In the Select column, click the Aggregator Port that is to be
used as the aggregator link number. Each media port is assigned
an aggregator port number, which is the same as the media port
number by default. Select the lowest media port number of the
group of media ports as the aggregator port number. In the picture
above, media ports 1, 2, 3 and 4 are to be grouped together
into aggregator link 1.
4 Click Submit.
The Link Aggregation Ports Table, Aggregators Table, Link
Aggregation Port Statistics Table and Link Aggregation Ports Debug
Table display information detailed in the IEEE 802.3ad draft
specification.
For more advanced features of link aggregation, see Chapter 5 and
Appendix A.
View CPU Processes
The View CPU Processes screen displays the current status of all the
active processes in the switch’s multitasking operating system.
Configure Management Menu
Use the Configure Management menu to view and set the switch
configuration, set the date and time, change the basic and privileged
password, Telnet to a terminal or console, ping a device and set
SNMP configuration parameters.
66