Intel® NetStructure™ 6000 Switch

C H A P T E R 1
Using the Switch
• Trigger: temperature sensor has reached 48º C
Critical Warning: The switch temperature has reached 47º C.
Automatic shutdown has commenced.
In Intel Device View, this is a red warning alert.
• Trigger: temperature sensor has reached 44, 46 or 47º C and then
has dropped back to 43º C.
Critical Warning: The switch temperature has dropped below
critical limits. The temperature is now 43º C.
In Intel Device View, this is a green alert.
When one or two fans have failed, the warning messages are:
• Trigger: temperature sensor has reached 38º C
Critical Warning: The switch has reached 38C. Automatic
shutdown will occur at 40º C.
In Intel Device View, this is a red warning alert. This message is sent
every minute until the temperature drops below 38º C.
• Trigger: temperature sensor has reached 39º C
Critical Warning: The switch has reached 39ºC. Automatic
shutdown will occur at 40º C.
In Intel Device View, this is a red warning alert. This message is sent
every minute until the temperature drops below 38º C.
To replace the fan assembly
Warning Only fan assembly modules identified as “Hot Swappable
Fan” on the front of the chassis can be replaced
without powering down the switch.
1 Locate the fan assembly on the front panel of the chassis.
2 Unscrew the capture panel screws on the fan assembly panel.
3 Grasp the fan assembly with both hands and carefully pull it out
from the backplane.
25