Intel® NetStructure™ 6000 Switch

C H A P T E R 3
Using the Web Device Manager
VLAN routing configuration can be used in environments where
VLANs exist, and those VLANs are given IP addresses for
management, but no routing is required. In this environment, IP
routing can be disabled for each VLAN.
5 Click Submit.
VLAN Reset
To reset all of the VLANs to the factory default
1 Click the VLAN menu, then VLAN Reset. The VLAN Reset
screen is displayed.
2 Click Submit.
VLAN Security
VLANs are used to limit traffic to a particular area of the network.
802.1Q introduces the concept of tagged frames, where VLAN
information is included in the frame. Using tagged frames allows
VLAN information to be communicated across multiple switches.
Such a VLAN tag includes information for both the VID and the
priority of the frame. However, storing VLAN and priority
information in the frame can cause security problems.
To configure VLAN security
1 Click the VLAN menu, then VLAN Security. The VLAN
Security options are displayed.
81