Intel® NetStructure™ 6000 Switch

C H A P T E R 1
Intel® NetStructure 6000 Switch User Guide
Type the non-privileged show sysfails command at the command line
to display which of the three fans has failed.
6000 Switch>#>show sysfails
Fan Failure at Tue 6/8/99 12:59
Fan 2 had failed, and is still failing.
Note If the maximum operating temperature does not exceed 40º
C (104º F), the switch continues to operate for the periods
described in the following table Type show temperature at
the command line to view the current switch temperature.
Number of Failed Fans Shut-down Time
1 None
2 12 hours
3 1 hour
The following messages warn of impending shutdowns.
• Trigger: temperature sensor has reached 44º C
Warning: The switch temperature has reached 44º C. Automatic
shutdown will occur at 48º C.
In Intel Device View, this is a yellow warning alert. This message is
sent every five minutes until the temperature drops below 44º C or
reaches 46º C.
• Trigger: temperature sensor has reached 46º C.
Critical Warning: The switch has reached 46º C. Automatic
shutdown will occur at 48º C.
In Intel Device View, this is a yellow warning alert. This message is
sent every minute until the temperature drops below 46º C or reaches
47º C.
• Trigger: temperature sensor has reached 47º C.
Critical Warning: The switch temperature has reached 47º C.
Automatic shutdown will occur at 48º C.
In Intel Device View, this is a red warning alert. This message is sent
every one minute until the temperature drops below 47º C or reaches
48º C.
24