Intel® NetStructure™ 6000 Switch

C H A P T E R 3
Using the Web Device Manager
To swap rules
1 Select the rules that you want to swap or reverse order. Use
Ctrl-click or Command-click to select the rules that you want to
swap.
2 Click Swap.
Note You cannot swap two rules, if one is an end rule.
To delete a rule
1 Click the rule that you want to delete. To select more than one
rule, use Ctrl-click or Command-click to highlight the rules that
you want to delete.
2 Click Delete.
Port Mirroring
Port mirroring is a useful diagnostic tool because it allows you to send
a copy of the good Ethernet frames transmitted or received on one
port to another port. On the second port you can attach a protocol
analyzer to capture and analyze the data without interfering with the
client on the original port.
To configure Port Mirroring
1 Click the View/Configure menu, then Port Mirroring. The
Port Mirroring configuration is displayed.
59