Intel® NetStructure™ 6000 Switch

More documents

Recommendations

Info

A P P E N D I X B GateD Reference Configurable Parameters gated/rip# d rip --------------------- preference: 100 defaultMetric: 16 stats preference preference Sets the route preference learned from RIP. The default preference is 100. This may be overridden by a preference specified in the import policy. defaultMetric metric Each RIP routing table entry contains a metric or cost for each destination, called a hop. RIP selects the route with the lowest hop count as the best route. However, the longest hop cannot exceed 15 hops. The metric can be overridden by the export policy. RIP Interface Configuration The ifs command defines the interfaces used by RIP and defines the configuration parameters for that interface. Configurable Parameters mode {none | ripin | ripout | both} Type NONE RIPIN RIPOUT BOTH Description disable RIP on the interface receives RIP packets only sends RIP packets only receives and sends RIP packets (default) version ver {1 | 2 } Specifies the RIP packet version (RIP 1 or RIP 2) sent from the interface. The default is RIP 1. Note: incoming RIP packets from both versions are always accepted on the interface regardless of this setting. 310
A P P E N D I X B Intel® NetStructure 6000 Switch User Guide metricIn metric Specifies the RIP metric increment to the learned routes before they are installed. Using this parameter makes the routes learned from this interface less preferable. metricOut metric Specifies the RIP metric increment to the routes sent out via this interface. Using this parameter makes the routes received from this link less preferable. authType authtype {none | simple} It is only meaningful to RIP version 2. When SIMPLE authentication is used, a network-wide authKey is provided. The default is none. authKey key It is only used when authentication type is SIMPLE. The authKey (password) must be the same network wide. OSPF Configuration OSPF is a protocol designed to be used inside Autonomous Systems. It is not designed to route between Autonomous Systems. gated/ospf# di ospf --------------------- preference: asBdrRtr: stats lsaDb nbrTable ase area[0.0.0.1] gated/ospf# 10 yes ] Configurable Parameters preference preference It sets the preference for OSPF when importing intra- and inter-area Autonomous System External (ASE) routes into the GateD routing table. The default is 10. asBdrRtr { yes |no } 311
Page 1 and 2:
Intel® NetStructure 6000 Switch Us
Page 3 and 4:
Contents Using the Switch 5 Unpacki
Page 5:
Contents Intel® NetStructure 6000
Page 8 and 9:
C H A P T E R 1 Intel® NetStructur
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 123 and 124:
Using Local Management Topic See Pa
Page 125 and 126:
C H A P T E R 4 Using Local Managem
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Managing the Switch Topic See Page
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
$ Appendix A: Command Reference
Page 215 and 216:
A P P E N D I X A Intel® NetStruct
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262: A P P E N D I X A Intel® NetStruct
Page 305: A P P E N D I X A Intel® NetStruct
Page 308 and 309: A P P E N D I X B GateD Reference T
Page 310 and 311: A P P E N D I X B GateD Reference m
Page 314 and 315: A P P E N D I X B GateD Reference A
Page 316 and 317: A P P E N D I X B GateD Reference C
Page 318 and 319: A P P E N D I X B GateD Reference c
Page 320 and 321: A P P E N D I X B GateD Reference S
Page 322 and 323: A P P E N D I X B GateD Reference R
Page 324 and 325: A P P E N D I X B GateD Reference l
Page 326 and 327: A P P E N D I X B GateD Reference m
Page 328 and 329: Support Services Intel offers a ran
Page 330 and 331: A P P E N D I X C Intel® NetStruct
Page 332 and 333: A P P E N D I X C Technical Informa
Page 335 and 336: , Index Symbols ? command 218 Numer
Page 337 and 338: I N D E X Intel® NetStructure 6000
Page 345: I N D E X Intel® NetStructure 6000
show all

Intel® NetStructure™ 6000 Switch

Create successful ePaper yourself

Delete template?

Save as template?