Intel® NetStructure™ 6000 Switch

A P P E N D I X A
Intel® NetStructure 6000 Switch User Guide
set storm bdiscard seconds { all | port_number }
sets the broadcast discard duration. The discard duration range
is zero (0) to 256 seconds.The default is 5 seconds.
Example
6000 Switch>set storm bdiscard 4 3
set storm mthreshold percentage { all | port_number }
sets the parameters for multicast storm control. The default
multicast threshold is 100 percent, which disables storm
control.
Example
6000 Switch>set storm mthreshold 95 3
set storm mdiscard seconds { all | port_number }
sets the multicast discard duration. The discard duration range
is zero (0) to 256 seconds.The default is 5 seconds.
Example
6000 Switch>set storm mdiscard 8 3
set storm nodiscard { all | port_list }
resumes receiving on a port that is discarding. The discard
duration range is zero (0) to 256 seconds.The default is 5
seconds.
Example
6000 Switch>set storm mdiscard 0 1
The following message is displayed:
Port 1 will be disabled when broadcast load reaches threshold. User interaction
is required to remove the port from discarding state.
set syslog
The syslog feature records such events as logins, configuration
changes and error messages that occur on the switch. If an
error condition occurs, the switch attempts to write an entry to
the system log. The log information is sent to a syslog service
on a remote host. All of the syslog command settings and log
entries are held in non-volatile RAM.
Example
6000 Switch>#>set syslog help
Usage: set syslog host {ip_address | hostname}
set syslog {lcmds | nolcmds}
set syslog {lout | nolout}
set syslog facility
can be auth, authpriv, cron. daemon, kern, lpr, mail,
news, syslog, user, uucp, or local0 through local7.
Default is local0.
279