Intel® NetStructure™ 6000 Switch

A P P E N D I X A
Command Reference
show fdb option
displays the current contents of the forwarding database.
Example
6000 Switch>show fdb
FDB aging time 300 seconds, Aging is Enabled.
MAC addresses Port Network
00:00:00:00:00:03
00:a0:24:d7:e0:24
00:a0:24:e0:22:74
00:a0:24:e0:2c:ae
00:a0:24:e0:36:30
00:a0:24:e0:36:bb
---- 3
---- 3
---- 3
---- 3
---- 3
---- 3
there were 6 entries found
show fdb [ entry_count ]
displays no more than the number of addressesses specified by
entry-count. The default is the first 200 or less addressesses.
show fdb all
displays all the addressesses in the database. The maximum
number that can be stored is 55,000.
show fdb tally
displays the number of addressesses stored for each port.
show fdb IP [tally]
displays the number of addressesses
show fdb VID
Individual VLAN Learning (IVL) mode must be activiated
with the fdb mode ivl command to display the VLAN
information.
6000 Switch>#>show fdb
FDB mode is indepedent (IVL)
GIG LEARNED
GIG LEARNED
GIG LEARNED
GIG LEARNED
GIG LEARNED
GIG LEARNED
FDB for VLAN 1, FDB age time 10 seconds, aging is enabled
VID MAC Address Port Network
1 00:00:00:00:01:01 ---- 1 GIG LEARNED
1 00:00:00:00:01:02 ---- 2 GIG LEARNED
FDB for VLAN 1: there were 2 entries found
FDB for VLAN 2, FDB age time 300 seconds, aging is enabled
284