Intel® NetStructure™ 6000 Switch

C H A P T E R 3
Using the Web Device Manager
To ping to a device
1 Click the Configure Management menu, then Ping. The Ping
from Switch configuration screen is displayed.
2 Type in the IP address of the device you want to ping.
3 Select the number of seconds to time-out before a connection is
made from the drop-down box. If the device is on a remote network,
you may need to adjust the timeout in order to receive a
response.
4 Click Ping to start the process.
SNMP Configuration
SNMP Security Level, Community Configuration, and Host
Configuration combine to control read, write, and trap access for the
managed device. The Community string is used by network
management applications to gain access to the SNMP data in the
managed device.
71