Intel® NetStructure™ 6000 Switch

C H A P T E R 3
Intel® NetStructure 6000 Switch User Guide
2 Select the options that you want to change.
• Status: Click Enabled to activate Port Mirroring.
• Source Port: Type the port number for the port whose traffic
you want to mirror. The range is determined by the number of
ports installed in the chassis.
• Monitor Port: Type the port number for the port to receive the
mirrored traffic. This would be a port to which you have
connected a protocol analyzer. The range is determined by the
number of ports installed in the chassis.
Note To change port settings, Port Mirroring must be disabled.
3 Click Submit.
BOOTP/DHCP Relay Agent
A BOOTP relay agent enables the switch to pass DHCP and BOOTP
broadcast messages from one subnet to another.
To configure the BOOTP relay agent
1 Click the View/Configure menu, then BOOTP/DHCP Relay
Agent.
60