24.05.2014 Views

BDP-440 BDP-140 - Abt

BDP-440 BDP-140 - Abt

BDP-440 BDP-140 - Abt

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>BDP</strong>-<strong>140</strong>_UCXCNSM_IBD_EN.book Page 24 Tuesday, July 19, 2011 10:54 AM<br />

03<br />

Chapter 3<br />

Getting Started<br />

Making settings using<br />

the Setup Navigator<br />

menu<br />

Be sure to perform these settings when using the player<br />

in the following situations.<br />

• When you use the player for the first time.<br />

•After Initial Setup format.<br />

•After updating the player’s software.<br />

Caution<br />

•Before turning on the power, check that the<br />

connections between the player and other devices are<br />

correct. Also, turn on the power of the devices<br />

connected to the player before turning on the player’s<br />

power.<br />

• When using a Pioneer Flat Screen TV or front<br />

projector compatible with the Control function, set<br />

Control to On on the connected device before turning<br />

on the player’s power.<br />

Note<br />

•When a Pioneer Flat Screen TV or front projector<br />

compatible with the Control function is connected to<br />

the player using an HDMI cable, the player is<br />

automatically set to the optimum picture quality for<br />

the connected device.<br />

3 Start Setup Navigator.<br />

Press ENTER.<br />

• Setup Navigator starts.<br />

4 Select the OSD language.<br />

Use / to select, then press ENTER.<br />

When a Pioneer Flat Screen TV that is compatible with<br />

Control function is connected to this player’s HDMI OUT<br />

terminal, language settings are imported from the<br />

Pioneer Flat Screen TV’s language settings before Setup<br />

Navigator begins.<br />

5 Select the appropriate output resolution for the<br />

connected TV.<br />

Use / to select, then press ENTER.<br />

6 Select the appropriate aspect for the connected<br />

TV.<br />

Use / to select, then press ENTER.<br />

7 Close the Setup Navigator menu.<br />

Press ENTER.<br />

• Setup Navigator finishes and the setting is stored.<br />

•Press RETURN to go back to the previous<br />

screen.<br />

1 Turn on the TV’s power and switch the input.<br />

See the TV’s operating instructions for the details of<br />

operating the TV.<br />

2 Turn on the player’s power.<br />

Press STANDBY/ON.<br />

Check that the Setup Navigator menu is displayed.<br />

If the Setup Navigator menu is not<br />

displayed<br />

Press HOME MENU to display the Home<br />

Menu, select Initial Setup Setup Navigator <br />

Start, then press ENTER.<br />

24<br />

En

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!