Special Issue; Products for Industrial Machinery - NTN
Special Issue; Products for Industrial Machinery - NTN
Special Issue; Products for Industrial Machinery - NTN
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>NTN</strong> TECHNICAL REVIEW No.742006<br />
4.2 Temperature rise comparison test<br />
To evaluate the running per<strong>for</strong>mance of the<br />
keystone design, the temperature increase<br />
characteristics were compared to those of the<br />
conventional design.<br />
As shown in Fig. 7, the temperature increase of the<br />
keystone design was limited compared to the<br />
conventional design. There was an approximately<br />
10°C maximum difference in temperature increase<br />
between the new and conventional designs. In<br />
addition, after undergoing the test. The conventional<br />
design exhibited smearing, something not apparent in<br />
the keystone design (Fig. 8).<br />
Test conditions<br />
Loading condition<br />
Radial load Fr= 69 kN<br />
Rotation speed<br />
Up to 2000 min -1<br />
Lubricating oil<br />
Turbine VG56<br />
Lubricating system<br />
Oil bath<br />
Temperature rise on outer ring ˚C<br />
70<br />
60<br />
50<br />
40<br />
30<br />
20<br />
10<br />
New design<br />
Conventional<br />
design<br />
0<br />
0 500 1000<br />
1500 2000 2500<br />
Fig. 7 Temperature rise<br />
Aborted when abnormal<br />
vibration occurred.<br />
Rotation speed min -1<br />
Fig. 8 Bearing condition after test<br />
-94-