User Manual XXL Globetrotter 2006 - Dethleffs

Appliances
10
To program, switch on the air conditioning unit with the key (Fig. 75,7) on
the remote control.
Set the desired operating mode and room temperature with the keys
(Fig. 75,8, 3 and 4).
Use the key (Fig. 75,5) to select the desired function (Fig. 75,1):
"ON": Switching on
"OFF": Switching off
Use the keys (Fig. 75,4) to select the desired switching time (1 to
15 hours). The arrow (Fig. 75,2) flashes and indicates the setting mode.
If "ON" (switch on) was selected, the air conditioning unit must be switched
off again with the remote control after the setting process. The indicator
lamp in the receiver flashes and confirms the programming.
The indicator lamp in the receiver flashes and confirms the programming if
"OFF" (switch off) was selected. Do not switch off the air conditioning unit
with the remote control.
To go easy on the batteries in the remote control, the infrared transmitter
can be covered by hand and the remote control then switched off after the
"OFF" programming. In this way no signal is transferred to the receiver and
the programming is retained.
The key (Fig. 75,6) is used to send the settings of the remote control
repeatedly to the receiver.
Further information can be obtained from the separate instruction manual
"Frostair".
Globetrotter XXL - 05-06 - DET-0047-00EN
101