User Manual XXL Globetrotter 2006 - Dethleffs

7
Living
Do not load the overcab bed without mattress. The plastic mould part can
break!
Fig. 35
Overcab bed
Access ladder
Safety net
Setting up:
Folding mechanism
Always use the access ladder provided as standard to access the overcab
bed.
The safety net (Fig. 35,3) is stored as standard between the mattress and
slatted frame. Only use the safety net if persons are already in the alcove.
Fasten the retaining straps (Fig. 35,1) to the holders on the ceiling
(Fig. 35,2).
The overcab bed can be folded up. This simplifies passage from driver's cabin
to living area.
Fig. 36
Overcab bed, folded upwards
Folding upwards: Open driver's cabin partition (see section 7.3).
Lift the mattress forwards and set it down on the panel.
Fold the front of the overcab bed (Fig. 36,1) upwards. The overcab bed is
kept in the upper position by gas-pressure springs.
Folding downwards:
Pull overcab bed downwards.
If necessary, push the mattress behind the panel.
58 Globetrotter XXL - 05-06 - DET-0047-00EN