User Manual XXL Globetrotter 2006 - Dethleffs
User Manual XXL Globetrotter 2006 - Dethleffs
User Manual XXL Globetrotter 2006 - Dethleffs
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Appliances<br />
10<br />
10.6.2 Operation (Dometic 7 series with AES and FH)<br />
Operating modes<br />
The refrigerator is equipped with an automatic system to select the type of<br />
power (AES). The AES automatically selects the optimal energy source and<br />
regulates the refrigerator operation. <strong>Manual</strong> intervention to select the type of<br />
power is possible but not required.<br />
The AES selects from the following types of power:<br />
Solar installation 12 V<br />
<br />
240 V AC<br />
<br />
12 V DC <br />
Gas<br />
Choosing the available energy source highest on the list.<br />
Even when the 12 V power supply is switched off, a small electrical power<br />
flows which puts an extra load on the living area battery. Always switch off<br />
the refrigerator for a temporary lay-up.<br />
1 Frame heater (FH) button<br />
2 Indicator lamp<br />
3 Energy selector switch<br />
4 Indicator lamps<br />
5 Indicator lamps<br />
6 Control knob for setting the temperature<br />
Fig. 71<br />
Operating controls for the<br />
refrigerator (Dometic 7 series<br />
with AES and FH)<br />
240 V operation If the 240 V power supply is connected, this energy source is selected as the<br />
first priority by the AES.<br />
12 V operation 12 V operation is only selected by the AES if the vehicle's engine is running<br />
and the alternator supplies sufficient 12 V operating power.<br />
Gas operation<br />
Never let gas escape unburned due to danger of explosion.<br />
<br />
It is not permitted to operate the refrigerator with car gas.<br />
<br />
Open the regulator tap on the gas bottle and the gas isolator tap "Refrigerator".<br />
<br />
If the 240 V power supply is not connected and the vehicle's engine is not running<br />
the AES selects the gas supply. When selecting gas operation the ignition<br />
fuse is opened automatically so gas can get into the burner. At the same<br />
time the electronic ignition is activated. If the gas flame is extinguished, e.g. by<br />
blast of wind, the ignition is activated immediately and re-ignites the gas.<br />
When the gas operation is faulty, the "GAS" indicator lamp (Fig. 71,4) flashes<br />
red.<br />
<strong>Globetrotter</strong> <strong>XXL</strong> - 05-06 - DET-0047-00EN<br />
97