User Manual XXL Globetrotter 2006 - Dethleffs

7
Living
7.9 Tables
7.9.1 Suspension table with fold-out leg
Fig. 25
Extend suspension table
The suspension table size can be enlarged by inserting a table-top extension.
Extending: Undo the knurled screws (Fig. 25,2).
Lift the table-top slightly and pull out it out as far as possible. The table
extension (Fig. 25,1) is fully extended.
Set down the table.
Take table-top extension out of the holder underneath the table and insert
it in the table extension.
Lift the table-top slightly and push it back as far as possible.
Tighten the knurled screws.
Reducing size: Undo the knurled screws (Fig. 25,2).
Slightly lift the front of the table-top and pull out.
Remove the table-top extension and insert it in the holder under the table.
Lift the table-top slightly and push it back as far as possible. The table
extension (Fig. 25,1) is fully retracted.
Set down the table.
Tighten the knurled screws.
Fig. 26 Bed foundation Fig. 27 Lock
The table's fold-out leg enables it to be used as a bed foundation.
Conversion to bed
foundation:
Lift the front of the table-top (Fig. 26,1) by approx. 45°.
Pull the lower part of the fold-out leg (Fig. 26,2) down and fold through 90°.
Press the release knob (Fig. 27,1) on the lock (Fig. 26,3).
54 Globetrotter XXL - 05-06 - DET-0047-00EN