User Manual XXL Globetrotter 2006 - Dethleffs
User Manual XXL Globetrotter 2006 - Dethleffs
User Manual XXL Globetrotter 2006 - Dethleffs
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
10<br />
Appliances<br />
10.2.4 Reducing the rotational speed of the circulating pump<br />
Fig. 60<br />
Rotational speed reduction<br />
switch<br />
The rotational speed of the circulating pump can be reduced using the sliding<br />
switch (Fig. 60,2). This also reduces the operating sound of the pump.<br />
The sliding regulator is located in the hot-water heater area.<br />
Setting the output:<br />
Push sliding trap (Fig. 60,1) towards the right. The power is reduced.<br />
<br />
Push sliding trap towards the left. The hot-water heater runs with normal<br />
<br />
power.<br />
10.2.5 240 V circulating pump<br />
Depending on the equipment, the hot-water heater has an additional 240 V circulating<br />
pump.<br />
If the vehicle is connected to the 240 V power supply, then it is possible to<br />
switch to the higher output of the 240 V circulating pump.<br />
Fig. 61<br />
Change-over switch for circulating<br />
pumps<br />
The switch (Fig. 61) for switching between the 12 V circulating pump and the<br />
240 V circulating pump is located on the hot-water heater operating unit.<br />
Selecting the 240 V<br />
circulating pump:<br />
Selecting the 12 V<br />
circulating pump:<br />
Push the rocker switch (Fig. 61,1) to the right. The 240 V circulating pump<br />
<br />
is switched on.<br />
Push the rocker switch (Fig. 61,1) to the left. The 12 V circulating pump is<br />
<br />
switched on.<br />
88 <strong>Globetrotter</strong> <strong>XXL</strong> - 05-06 - DET-0047-00EN