User Manual XXL Globetrotter 2006 - Dethleffs

7
Living
7.13.2 Central seating group with extension
Fig. 40
Prior to conversion
1 Back cushion
2 Seat cushion
3 Table
4 Mounting rail
5 Flap
6 Bench seat extension
7 Bar
8 Handle
9 Additional cushion
10 Additional cushion
11 Additional cushion
Fig. 41
During conversion
Fig. 42
After conversion
Extend the table (Fig. 40,3) and convert it into a bed foundation (see
section 7.9).
Insert the bar (Fig. 40,7) or pull it inwards. The bar is correctly positioned if
it supports the table-top about 15 - 20 cm behind the table leg.
Attach the table to the lower mounting rail (Fig. 40,4).
Pull on the handle (Fig. 40,8) and open the flap (Fig. 40,5).
Fold up the bench seat extension (Fig. 41,6) and wedge it with the flap.
Fold up the lower part of one of the seat cushions (Fig. 42,2) and place the
seat cushion against the wall.
Place the second seat cushion next to the first seat cushion.
Insert the back cushions (Fig. 42,1) between the seat cushions and the
wall.
Insert the additional cushion (Fig. 42,9) between the back cushions and the
wall.
Insert the additional cushions (Fig. 42,10) between the cushions and the
wall.
Insert the additional cushions (Fig. 42,11) between the cushions and the
wall.
60 Globetrotter XXL - 05-06 - DET-0047-00EN