2008 Manual of Motorcycle Sport - Motorcycling Australia

More documents

Recommendations

Info

Ariel BSA Cotton DOT DMW ESO FN Francis Barnett Gilera Greeves Husqvarna James LITO Norman Norton Metisse Sarolea Sun Tandon Triumph Villiers Vincent Velocette Japanese 156 enjoy the ride All 4-strokes All pre-unit, C15 distributor models and Bantams (No Cheney frames allowed). Single down tube, leading link only (250cc conversion allowed) Round tube frames only (250cc conversion allowed) Up to and including Mk12 (250cc conversion allowed) 4-stroke All Up to Falcon 82. Saturno Cross Up to and including Hawkstone SAS, 25SA, 24 and 20SAS and SCS. 175cc 3-speed 2-stroke, 500cc Albinbased 4-stroke Up to Cotswold with AMC engine. All BSA/LITO engines Some LITO/ Albin engines All All singles, 500 and 650 twins Mk1 Triumph engine BSA duplex frame and Mk2 Triumph engine (The Mk2 has fibreglass bodywork which is acceptable). All All All All pre-unit and distributor unit models only. Only Ajax and Vale Onslow conversions for Villiers engines are acceptable. No Starmaker engines. All All All pre-1960 18.7.2 Tables of Machines and Components – 1960- 1965 18.7.2.1 Acceptable for the Pre-1965 class are machines built up to and including the 1964 model. The only exception to this GCR is where the model remains unaltered after this date. MAKE MODEL(S) AJS All 4-strokes Ariel All Bultaco Pre 1965 only BSA All except B44 and B50. All originally fitted with leading link forks. Cotton (Also permissible are machines fitted with telescopic forks at a later date. Villiers and Triumph engines only). CZ 250cc Twin port models only All Enfield of India without modern Enfield attributes which contravene the general requirements. ESO All 2-valve 4-strokes DOT All DKW All pre-1965 DMW All FN All Francis Barnett All Gilera Saturno Cross Greeves All 250cc alloy beam up to Mk3. Hedlund All 2-stroke: 250 bolt up frames only to Husqvarna 1967. Later American Enduro frames are not acceptable. 4-stroke: All Albin-based engines. James All Jawa 2-stroke: All except ISDT 4-stroke: All 2-valve LITO All Maico 250 Pre 1965 only Maico MC175 Matchless All Monark All Albin-based engines. Some early 2-strokes may be eligible. Montesa All pre 1965 Moto Parilla 250cc 4-stroke engines. Norman All Norton All except P11 and Commando Puch Some early 2-strokes may be eligible Royal Enfield All Sarolea All 4-strokes All pre 1965 Sprite All Villiers and Triumph engines Sun All Tandon All Triumph All except T140, TSS, T150, T160 and BSA unit single derivatives Velocette All Vincent All Japanese All pre 1965 SPECIALS Cheney All Gold Star Greeves Triumph: all Kyffin DOT and Sapphire MABSA All Metisse Up to Mk3 only Puissant 4-strokes only TRIBSA All Wasp All Cochise All 18.7.3 Table of Acceptable Components Pre-1965 Only 18.7.3.1 The following parts, or replicas of, do not necessarily comply with the cut-off date, 2008 MANUAL OF MOTORCYCLE SPORT
Forks Wheels Controls Handlebars Brakes Frames Engines but offer no real technological advantage over components made before that date. Components must not exceed manufacturing date of 31 st December 1969. Ceriani, MP, REH, Husqvarna, CZ, Betor, Bultaco, Montesa BSA/Triumph. (Note: Late-type Ceriani and Betor [Can-Am] with long sliders are not permitted). Rickman alloy and magnesium, REH, BSA/Triumph conical alloy, AJS Stormer, Greeves conical, small Husqvarna, CZ Motocross and pattern parts to these designs. Early Bultaco full width hubs and Montesa full width hubs are allowed. All side pull throttles and late clutch and front brake levers. All, including alloy. Single leading shoe brakes only unless manufactured prior to 31/12/1964. This includes replica frames. BSA B50 and B25SS frames are not permitted. All JAP (J A Prestwitch). 18.7.4 Tables of Machines and Components – 1965- 1970 18.7.4.1 Acceptable for the Pre-1970 class are machines built up to and including the 1969 model. The only exception to this GCR is where the model remains unaltered after this date. MAKE MODEL(S) AJS Stormer (all) BSA B44 up to & incl. B25, C15, Bantam Up to & incl. MK4 boat tail Pursang & Bultaco El Bandido, Sherpas & their Enduro versions (Lobito, Matador, Campera). CZ Twin port, 360(969-0), 250(980-02) DKW 5 speed DOT Any Greeves Any alloy beam model. All steel tubing frame models numbers 56, 58, & 59 Honda CL175, CL350 Hodaka Ace 100, Ace 90 Husqvarna Any oval case engine in original frame 250, 360 & 400 Jawa Scrambler & banana frame 6 day bike, Jawa early CZ 250 trail bike Kawasaki F2IM(250), F4(250), F5(350) Maico Oval case engine square barrel 250 & 360 Montesa Lacrosse 250, Orange Capra GP250, GP360 & early King Scorpion MZ Ossa Suzuki Triumph Yamaha Zundapp ISDT Stiletto 4 speed, 230 Pioneer 4 speed TS250 1969 model, points ignition & appropriate engine cases T100 and all pre 1970 models AT1, DT1, CT1, rectangular swing arm DT1 & RT1 pre-reed block ISDT 18.7.5 Tables of Machines and Components – 1970- 1975 18.7.5.1 Acceptable for the Pre-1975 class are machines built up to and including the 1974 model. The only exception to this GCR is where the model remains unaltered after this date. MAKE MODEL(S) AJS 410 (all inclusive) Benelli 175 trail BSA B50 Bultaco Up to & incl. MK7 125, 250 & 360 Carabela 200 Can-Am 175, 250 TNT only CCM BSA based Cooper All CZ Up to & incl. 1974 models incl CMS framed CZs DKW 6 speed radial finned 125 Ducati RT 450 Gemini 175 trail Greeves All models CR125M & M1, CR250M, XL250 K0, Honda XL350 K0,K1, all SL100, all SL125, all SL350, all XL100 K0, MT250. Hodaka All 100 & 125 models Up to & incl. Magnesium engine reed Husqvarna valve 250 & others. Pre Mikkola replica - no radial finned engines. Harley Davidson All SX125, SX250, SX175 trail Indian All Jawa ISDE 250, 402 Kawasaki KX125 74, KX250 74, KX450 74, F11M, F12M, F81M Up to & incl. 1974 GS & MC125, 175, KTM 250. Check date stamp on engine below counter shaft right case Up to & incl. 1974; 250, 400, 440LTR, Maico 501. Check date stamp on top of barrel & nut holding sprocket to countershaft. 4 speed gearbox only. Montesa Cappra 250 VR, Monark All MZ 400 ISDT Ossa Phantom 250, 125, SDR 250, Stiletto 250 2008 MANUAL OF MOTORCYCLE SPORT enjoy the ride 18 classic motocross & dirt track 157
Page 3 and 4:
Motorcycling Australia 2 0 0 8 M a
Page 5 and 6:
ut still showed his quality by mana
Page 7 and 8:
5 PROTESTS AND APPEALS... .. .. ..
Page 9 and 10:
15.19 Engines - Minimoto... .. .. .
Page 11 and 12:
23.1 Protective Clothing - Moto-Tri
Page 13 and 14:
TABLE OF CONTENTS 2008 MANUAL OF MO
Page 15 and 16:
MOTORCYCLING AUSTRALIA COMMISSIONS
Page 17 and 18:
A SHORT HISTORY OF MOTORCYCLING AUS
Page 19 and 20:
Clubs Clubs are the smallest, but o
Page 21 and 22:
MOTORCYCLING AUSTRALIA HALL OF FAME
Page 23 and 24:
motorcycling australia HALL OF FAME
Page 25 and 26:
2007 AUSTRALIAN CHAMPIONS 2007 AUST
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
2008 AUSTRALIAN motorcyclING calend
Page 33 and 34:
Say something like: “Physical fit
Page 35 and 36:
THE GENERAL COMPETITION RULES THE P
Page 37 and 38:
RULES AND MAKING RULE CHANGES Rules
Page 39 and 40:
Procedure for Consideration of Item
Page 41 and 42:
1 JURISDICTION 1.1 Definitions 1.1.
Page 43 and 44:
i) Prescribe levels of noise, atmos
Page 45 and 46:
2.3 sports development levy 2.3.1 C
Page 47 and 48:
the meeting, k) Order the administr
Page 49 and 50:
2 administration 2.5.11.5 The RCB m
Page 51 and 52:
3.1.2 LICENCE TYPES AND ACTIVITY EL
Page 53 and 54:
legal guardian of the applicant. v)
Page 55 and 56:
4 COMPETITIONS 4.1 Venues 4.1.1 Reg
Page 57 and 58:
4.2.2.5 The permit for an event mus
Page 59 and 60:
MA series event: a) Must be faxed o
Page 61 and 62:
advantage as a result of an unfair
Page 63 and 64:
or directions as the appellate body
Page 65 and 66:
informed of facts in such manner as
Page 67 and 68:
6 JUDICIAL COMMITTEE GUIDELINES 6.1
Page 69 and 70:
competing in International competit
Page 71 and 72:
an applicant must a) Be 18 years or
Page 73 and 74:
9 officials accreditation scheme
Page 75 and 76:
10 NATIONAL PERSONAL ACCIDENT INSUR
Page 77 and 78:
11 ANTI-DOPING POLICY This has been
Page 79 and 80:
and provide accurate and up-to-date
Page 81 and 82:
whereabouts information as required
Page 83 and 84:
disciplinary action against the emp
Page 85 and 86:
11.21.2 Notification to Competitors
Page 87 and 88:
12 ALL DISCIPLINES 12.1 Application
Page 89 and 90:
a measurer. All measurer’s report
Page 91 and 92:
a) At least 1 supporting the forwar
Page 93 and 94:
12.9.3.2 Fuel tests must comply wit
Page 95 and 96:
12.10.3 Use of sound level meters 1
Page 97 and 98:
conduct, or b) Having regard to any
Page 99 and 100:
h) Age group racing: i) Subject to
Page 101 and 102:
13 AUSTRALIAN CHAMPIONSHIPS 13.1 MA
Page 103 and 104:
13.2.8 Categories for Senior Austra
Page 105 and 106: qualifying or races, c) For Histori
Page 107 and 108: 15 Road racing 15.1 Protective Clot
Page 109 and 110: screen and instruments, but replace
Page 111 and 112: a) Steering damper, b) Ride height
Page 113 and 114: a) Brake pads, linings and brake ho
Page 117 and 118: cylinders, d) Have an engine capaci
Page 119 and 120: property of Formula Xtreme Pty Ltd
Page 121 and 122: o) Fuel injection 15.10.3.6 It is r
Page 123 and 124: 15.12.3.7 The fuel tank breather pi
Page 125 and 126: of the tray. 15.13.2.3 The front of
Page 127 and 128: i) No other alterations or modifica
Page 129 and 130: allowed, iv) No systems not sold or
Page 131 and 132: ) The leading edge of a sidecar mac
Page 133 and 134: a) A maximum capacity of 40 litres,
Page 135 and 136: 16.1.6 Hair and Jewellery 16.1.6.1
Page 137 and 138: 16.5.1.2 Round or Oval number plate
Page 139 and 140: foot controlled. 16.8.3 Period 4 16
Page 141 and 142: 17 MOTOCROSS AND SUPERCROSS 17.1 Pr
Page 145 and 146: CAPACITY RPM Up to 85cc 8,000 85cc
Page 147 and 148: 17.9 competition Rules - Supercross
Page 149 and 150: v) Gear levers, vi) Heavy duty rims
Page 151 and 152: 17.13.1.3 There will be a minimum o
Page 153 and 154: 18 CLASSIC MOTOCROSS & DIRT TRACK 1
Page 155: a) As per relevant period for the c
Page 159 and 160: Montesa King Scorpion & Cappra VR 2
Page 161 and 162: 18.10 Eligibility - CLASSIC LONG TR
Page 163 and 164: disturbance are not to be used, c)
Page 165 and 166: shape or modified in any way, other
Page 167 and 168: so as to prevent the passenger’s
Page 169 and 170: Fig 19.3.2.4 Carburettor dimensions
Page 171 and 172: a) Obtain approval from the Speedwa
Page 173 and 174: 19.11.7 Late Arrival 19.11.7.1 The
Page 175 and 176: e resolved as follows: a) The compe
Page 177 and 178: nominate 1 competitor for the Speed
Page 179 and 180: 19.12.10.7 Starting positions for t
Page 181 and 182: c) Competitors cannot change gate p
Page 183 and 184: 20 DIRT TRACK 20 dirt track 20.1 Pr
Page 185 and 186: as shown at 12.10.2. 20.4 Machine &
Page 187 and 188: per class 20.10.4.1 The championshi
Page 189 and 190: 21.1.5.2 Visors mounted on the helm
Page 191 and 192: is used, a steel bolt of not less t
Page 193 and 194: 21 track the highest number of poin
Page 195 and 196: 22.2 Engines - quads 22.2.1 Capacit
Page 197 and 198: 23 MOTO-TRIALS 23.1 Protective Clot
Page 199 and 200: with an original capacity of 250cc
Page 201 and 202: 23.7.3.2 The following penalties ap
Page 203 and 204: 24 SUPERMOTO 24 SUPERMOTO 24.1 Prot
Page 205 and 206: 24.7 competition Rules- supermoto 2
Page 207 and 208:
25 ENDURO AND RELIABILITY TRIALS 25
Page 209 and 210:
25.4.1 Courses 25.4.1.1 Courses mus
Page 211 and 212:
25.4.8.2 Competitors must at all ti
Page 213 and 214:
used when refueling. l) No fuel may
Page 215 and 216:
a) Be conducted on a closed circuit
Page 217 and 218:
a) Determine that no penalty should
Page 219 and 220:
seeded The seeded position of rider
Page 221 and 222:
awards. 25.10.3.7 Riders nominated
Page 223 and 224:
26 MINIKHANA 26.1 INTRODUCTION The
Page 225 and 226:
to B Grade. Riders who place 1st in
Page 227 and 228:
26.7 courses- minikhana 26.7.1 Basi
Page 229 and 230:
left. 26.7.11.2 Crossing the finish
Page 231 and 232:
area of 6 metres by 20 metres. 26.7
Page 233 and 234:
26.7.35 Procedure 26.7.35.1 The sta
Page 235 and 236:
28 RECREATIONAL MOTORCYCLE ACTIVITY
Page 237 and 238:
29 NATIONAL TEAM SELECTION POLICY T
Page 239 and 240:
appendix 1 29.0 APPROVAL LABELS FOR
Page 241 and 242:
appendix 2 MODEL SUPPLEMENTARY REGU
Page 243 and 244:
whether change of machine is allowe
Page 245 and 246:
Classes Machine Details and Capacit
Page 247 and 248:
appendix 3 MEMBER PROTECTION POLICY
Page 249 and 250:
that a child is being abused by the
Page 251 and 252:
or otherwise be destroyed with the
Page 253 and 254:
12. Forms of discipline If an indiv
Page 255 and 256:
Attachment A - Code of conduct As a
Page 257 and 258:
Appendix 4- PRIVACY REGULATION We r
Page 260 and 261:
enjoy the ride 2008 RIDERS’ DIVIS
Page 262 and 263:
Welcome to the Riders’ Division M
Page 264 and 265:
motorcycling australia tours Motorc
Page 266 and 267:
selecting an ma event There’s a w
Page 268 and 269:
• Take notice of any hazards iden
Page 270 and 271:
This effort is to help you navigate
Page 272 and 273:
as quick as possible. If you can, p
Page 274 and 275:
Computers Hewlett-Packard National
Page 276:
enjoy the ride 2008 RIDERS’ DIVIS
show all

2008 Manual of Motorcycle Sport - Motorcycling Australia

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?