RT120Q Operator's Manual - Ditch Witch
RT120Q Operator's Manual - Ditch Witch
RT120Q Operator's Manual - Ditch Witch
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Plow - 108<br />
Finish Plowing<br />
<strong>RT120Q</strong> Operator’s <strong>Manual</strong><br />
Operation<br />
1. When installation is complete, move plow swing out of float.<br />
2. With vibrator running, raise plow to ground level.<br />
NOTICE: Do not operate vibrator when plow is out of the ground. This will cause excessive<br />
vibration resulting in rapid wear, and possible damage to the unit and product being installed.<br />
3. Move attachment speed/direction control to neutral.<br />
4. Swivel seat to the drive position.<br />
5. Engage parking brake and verify parking brake indicator is on.<br />
6. Lower backfill blade, if equipped.<br />
7. Turn ignition switch to STOP and remove product from plow.<br />
8. Swing plow to center position and engage swing lock and stow lock.<br />
9. Raise backfill blade, if equipped.<br />
10. Disengage axle lock.<br />
IMPORTANT: Drive tractor in reverse 6’ (2 m) while turning steering wheel left to right to fully<br />
disengage axle lock.<br />
11. Drive a short distance away from work site.<br />
12. Shut down tractor. See page 80 for proper shutdown procedures.<br />
CMW
Change language