RT120Q Operator's Manual - Ditch Witch
RT120Q Operator's Manual - Ditch Witch
RT120Q Operator's Manual - Ditch Witch
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Controls - 58<br />
<strong>RT120Q</strong> Operator’s <strong>Manual</strong><br />
Backhoe Console<br />
Item Description Notes<br />
5. Remote throttle enable To enable remote throttle<br />
control, press top.<br />
To disable remote throttle<br />
control, press bottom.<br />
Note: This switch must be returned to<br />
the OFF position for normal throttle<br />
control at tractor.<br />
c00ic030w.eps<br />
6. Work light switch To turn on, press right.<br />
To turn off, press left.<br />
7. Swing lock pin To lock:<br />
• Engage stow lock.<br />
• Insert swing lock pin into<br />
hole (1).<br />
To release:<br />
• Remove pin and store in<br />
hole (2).<br />
• Release stow lock.<br />
This pin locks boom from swinging<br />
during transport.<br />
NOTICE: Do not store pin in holes<br />
marked with an “X.” Backhoe could<br />
swing and destroy pin.<br />
8. Remote ground drive<br />
control<br />
c00ic216h.eps<br />
To move tractor forward,<br />
push.<br />
To move tractor backward,<br />
pull.<br />
NOTICE:<br />
• This control is disabled if tractor<br />
seat is occupied.<br />
• Tractor must be in low speed for<br />
remote ground drive to function.<br />
• Ensure that backfill blade, if<br />
equipped, and stabilizers are<br />
raised before operating this<br />
control.<br />
• Do not move more than 30’ (10<br />
m) at a time.<br />
CMW