RT120Q Operator's Manual - Ditch Witch

RT120Q Operator’s Manual Operation Overview - 67
Digging with Backhoe
4. Begin drilling. See page 125.
5. Use drill string guide as needed. See page 126.
6. Add rod. See page 127.
7. Backream. See page 127.
8. Shut down tractor. See page 80.
9. Disassemble joints. See page 128.
Digging with Backhoe
1. Start unit. See page 76.
2. Set stabilizers and unstow backhoe. See page 116.
3. Excavate. See page 117.
4. Stow backhoe properly. See page 118.
5. Shut down tractor. See page 80.
Sawing
1. Start unit. See page 76.
2. Position tractor and controls. See page 130.
3. Begin sawing. See page 132.
4. Complete the installation. See page 134.
5. Backfill the trench. See page 144.
6. Shut down tractor. See page 80.
Leaving Jobsite
1. Backfill if necessary. See page 144.
2. Rinse equipment. See page 144.
3. Stow tools. See page 144.
4. Haul equipment from jobsite. See page 88.
CMW