RT120Q Operator's Manual - Ditch Witch
RT120Q Operator's Manual - Ditch Witch
RT120Q Operator's Manual - Ditch Witch
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Transport - 90<br />
<strong>RT120Q</strong> Operator’s <strong>Manual</strong><br />
Haul<br />
Unload<br />
Crushing weight. If load falls or moves it could kill or crush you. Use<br />
proper procedures and equipment or stay away.<br />
NOTICE:<br />
• Attach trailer to tow vehicle before loading or unloading.<br />
• Load and unload trailer on level ground.<br />
• Block trailer wheels.<br />
Rollover possible. If machine rolls over, you could be thrown from seat<br />
and killed or crushed. Wear seat belt.<br />
1. Lower trailer or ramps.<br />
2. Check that parking brake is engaged and verify that parking brake indicator is on.<br />
3. Check that ground drive controls are in neutral.<br />
4. Remove chains from tiedowns.<br />
5. Fasten and adjust seat belt.<br />
6. Tilt steering column down.<br />
7. Start tractor. See page 76 for proper start-up procedures.<br />
8. Raise attachments, but keep them low and centered. Check that they are not in float.<br />
9. Release parking brake and verify that parking brake indicator is off.<br />
10. Slow engine to low throttle and slowly back unit down trailer or ramps.<br />
CMW
Change language