RT120Q Operator's Manual - Ditch Witch

Operation Overview - 66
Planning
RT120Q Operator’s Manual
Planning
1. Gather information about jobsite. See page 70.
2. Inspect jobsite. See page 71.
3. Classify jobsite. See page 72.
4. Select chain and teeth to match your soil type, if necessary. See page 140
5. Check supplies and prepare equipment. See page 74.
6. Haul equipment to jobsite. See page 88.
Trenching
1. Start unit. See page 76.
2. Position tractor and controls. See page 94.
3. Begin trenching. See page 96.
4. Engage cruise control if desired. See page 138.
5. Complete the installation. See page 99.
6. Shut down tractor. See page 80.
Plowing
1. Start unit. See page 76.
2. Position tractor and controls. See page 102.
• offset plowing - page 109
• coordinated plowing - page 109
• crabbing - page 109
3. Attach product. See page 103.
4. Begin plowing. See page 105.
5. Engage cruise control if desired. See page 138.
6. Complete the installation. See page 108.
7. Shut down tractor. See page 80.
Drilling
1. Start unit. See page 76.
2. Dig approach trench and target trench. See page 123.
3. Assemble drill string and position tractor. See page 124.
CMW