RT120Q Operator's Manual - Ditch Witch

More documents

Recommendations

Info

RT120Q Operator’s Manual Service - 159 10 Hour Lube Trencher Auger Bearings Lube two auger bearing zerks (one on each side) every 10 hours with EPG. Lube Trencher Auger Shaft Lube four auger shaft zerks (two on each side) every 10 hours with EPG. Check Trencher Auger Bolts Check trencher auger bolts every 10 hours. For optimal spoils delivery, adjust augers to match terrain and digging depth.
Service - 160 RT120Q Operator’s Manual 10 Hour Check Digging Chain Teeth and Bits Check teeth (1) for wear every 10 hours. Replace worn teeth, using Ditch Witch replacement parts and maintaining original tooth pattern. For more efficient digging, contact your Ditch Witch dealer for information about the tooth pattern best suited to your jobsite. If using rock chain bits, check that bits rotate freely. Clean chain and check bits after each use. Replace bit when carbide cap or insert is worn or adapter can be damaged. Check chain every 10 hours. Replace worn or broken chains. If sidebars (2) are bent or loose on chain pins (3), chain spacers should be used to join sidebars. Check Boom Mounting Bolts Check 14 bolts (7 on each side) every 10 hours and tighten as necessary to keep bolts and other fasteners tight. Check for looseness or wear. Check that bolts are tightened to 250 ft•lb (28 N•m).
Page 1 and 2:
RT120Q Operator’s Manual Issue 1.
Page 3 and 4:
Overview - 2 Serial Number Location
Page 5 and 6:
Overview - 4 Unit Components RT120Q
Page 7 and 8:
Overview - 6 RT120Q Operator’s Ma
Page 9 and 10:
Foreword - 8 RT120Q Operator’s Ma
Page 11 and 12:
Contents - 10 RT120Q Operator’s M
Page 13 and 14:
Safety - 12 RT120Q Operator’s Man
Page 15 and 16:
Safety - 14 Safety Alerts RT120Q Op
Page 17 and 18:
Safety - 16 RT120Q Operator’s Man
Page 19 and 20:
Safety - 18 If an Electric Line is
Page 21 and 22:
Safety - 20 If a Fiber Optic Cable
Page 23 and 24:
Controls - 22 Center Console RT120Q
Page 25 and 26:
Controls - 24 RT120Q Operator’s M
Page 27 and 28:
Controls - 26 Graphic Display RT120
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Controls - 36 Diagnostics RT120Q Op
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Controls - 42 Left Console RT120Q O
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Controls - 56 Backhoe Console RT120
Page 59 and 60:
Page 61 and 62:
Controls - 60 Saw Controls RT120Q O
Page 63 and 64:
Controls - 62 Drill Controls RT120Q
Page 65 and 66:
Page 67 and 68:
Operation Overview - 66 Planning RT
Page 69 and 70:
Operation Overview - 68 RT120Q Oper
Page 71 and 72:
Prepare - 70 Gather Information RT1
Page 73 and 74:
Prepare - 72 Classify Jobsite RT120
Page 75 and 76:
Prepare - 74 Check Supplies and Pre
Page 77 and 78:
Drive - 76 Start Unit RT120Q Operat
Page 79 and 80:
Drive - 78 Drive RT120Q Operator’
Page 81 and 82:
Drive - 80 Shut Down RT120Q Operato
Page 83 and 84:
Transport - 82 Lift RT120Q Operator
Page 85 and 86:
Transport - 84 RT120Q Operator’s
Page 87 and 88:
Page 89 and 90:
Transport - 88 Haul RT120Q Operator
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Trench - 94 Setup RT120Q Operator
Page 97 and 98:
Trench - 96 Operation RT120Q Operat
Page 99 and 100:
Trench - 98 RT120Q Operator’s Man
Page 101 and 102:
Trench - 100 RT120Q Operator’s Ma
Page 103 and 104:
Plow - 102 Setup RT120Q Operator’
Page 105 and 106:
Plow - 104 RT120Q Operator’s Manu
Page 107 and 108:
Plow - 106 Prepare RT120Q Operator
Page 109 and 110: Plow - 108 Finish Plowing RT120Q Op
Page 111 and 112: Plow - 110 RT120Q Operator’s Manu
Page 113 and 114: Reel Carrier - 112 Setup RT120Q Ope
Page 115 and 116: Reel Carrier - 114 RT120Q Operator
Page 117 and 118: Backhoe - 116 Setup RT120Q Operator
Page 119 and 120: Backhoe - 118 Stow RT120Q Operator
Page 121 and 122: Backhoe - 120 RT120Q Operator’s M
Page 123 and 124: Drill - 122 Drilling Attachment RT1
Page 125 and 126: Drill - 124 Drill Rod and Equipment
Page 127 and 128: Drill - 126 Using Drill String Guid
Page 129 and 130: Drill - 128 Disassemble Joints RT12
Page 131 and 132: Saw - 130 Setup RT120Q Operator’s
Page 133 and 134: Saw - 132 Operation RT120Q Operator
Page 135 and 136: Saw - 134 RT120Q Operator’s Manua
Page 137 and 138: Saw - 136 RT120Q Operator’s Manua
Page 139 and 140: Systems and Equipment - 138 Cruise
Page 141 and 142: Systems and Equipment - 140 Chain,
Page 143 and 144: Systems and Equipment - 142 Optiona
Page 145 and 146: Complete the Job - 144 Restore Jobs
Page 147 and 148: Service - 146 Service Precautions R
Page 149 and 150: Service - 148 Tier 4i Engine RT120Q
Page 151 and 152: Service - 150 RT120Q Operator’s M
Page 153 and 154: Service - 152 Approved Coolant RT12
Page 155 and 156: Service - 154 Tractor RT120Q Operat
Page 159: Service - 158 Trencher RT120Q Opera
Page 167 and 168: Service - 166 Trencher RT120Q Opera
Page 169 and 170: Service - 168 Check Track Tension C
Page 171 and 172: Service - 170 250 Hour RT120Q Opera
Page 177 and 178: Service - 176 1000 Hour RT120Q Oper
Page 179 and 180: Service - 178 2000 Hour RT120Q Oper
Page 181 and 182: Service - 180 As Needed RT120Q Oper
Page 183 and 184: Service - 182 Trencher RT120Q Opera
Page 189 and 190: Specifications - 188 RT120Q Operato
Page 205 and 206: Specifications - 204 H1140 Saw RT12
Page 207: Warranty - 206 RT120Q Operator’s
Page 211:
Service Record - 210 RT120Q Operato
show all

RT120Q Operator's Manual - Ditch Witch

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?