RT120Q Operator's Manual - Ditch Witch
RT120Q Operator's Manual - Ditch Witch
RT120Q Operator's Manual - Ditch Witch
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>RT120Q</strong> Operator’s <strong>Manual</strong> Plow - 109<br />
Operation<br />
Special Plowing<br />
Your <strong>Ditch</strong> <strong>Witch</strong> equipment allows you to<br />
plow four ways: normal plowing, offset plowing<br />
(1), coordinated plowing (2), and crabbing (3).<br />
NOTICE: Oversteering blade may damage<br />
blade or cable.<br />
Offset Plow<br />
Offset plowing can be used to plow next to a<br />
road while keeping tracks on a more stable surface or in similar conditions.<br />
1. Use plow swing to move plow to planned trench line.<br />
2. Use blade steer to position blade parallel to direction of tractor frame.<br />
Coordinated Plow<br />
Coordinated plowing can be used to turn a tight circle around a jobsite obstacle or in similar conditions.<br />
1. Move rear steer/center switch to the rear steer position.<br />
2. Use the rear steer switch to position the tracks as shown above (2).<br />
3. Slowly move tractor forward.<br />
4. Plow as normal.<br />
IMPORTANT: When coordinated plowing, keep plow blade straight or in the same angle position as rear<br />
tracks.<br />
Crab Plow<br />
Crab can be used to plow along edge of jobsite or in similar conditions.<br />
1. Move rear steer/center switch to the rear steer position.<br />
2. Use the rear steer switch to position the tracks as shown above (3).<br />
3. Slowly move tractor forward.<br />
4. Plow as normal.<br />
CMW
Change language