RealView Compilation Tools - ARM Information Center

Compiler Command-line Options
Note
• --translate_gld is used by invoking armcc as if it were the GNU linker. This is
intended only for use by existing build scripts that involve the GNU linker
directly.
• In gcc and g++ modes, armcc reports itself with --translate_gld as the linker it
uses. For example, gcc -print-file-name=ld.
See also
• --arm_linux on page 2-9
• --arm_linux_config_file=path on page 2-10
• --arm_linux_configure on page 2-12
• --arm_linux_paths on page 2-13
• --configure_cpp_headers=path on page 2-24
• --configure_extra_includes=paths on page 2-25
• --configure_extra_libraries=paths on page 2-26
• --configure_gcc=path on page 2-27
• --configure_gld=path on page 2-28
• --configure_sysroot=path on page 2-29
• --gnu_defaults on page 2-68
• --shared on page 2-115
• --translate_g++ on page 2-122
• --translate_gcc on page 2-124
• --arm_linux on page 2-11 in the Linker Reference Guide
• --library=name on page 2-54 in the Linker Reference Guide
• --search_dynamic_libraries, --no_search_dynamic_libraries on page 2-78 in the
Linker Reference Guide
• Application Note 212 - Building Linux applications using RVCT v4.0 and the
GNU Tools and Libraries.
2.1.159 --trigraphs, --no_trigraphs
This option enables and disables trigraph recognition.
Default
The default is --trigraphs, except in GNU mode, where the default is --no_trigraphs.
2-126 Copyright © 2007-2010 ARM. All rights reserved. ARM DUI 0348C
Non-Confidential,
ID101213