RealView Compilation Tools - ARM Information Center

Compiler-specific Features
Where:
tag[,tag,...]
is a comma-separated list of diagnostic message numbers
specifying the messages whose severities are to be changed.
See also
• --diag_remark=tag[,tag,... ] on page 2-45
• --remarks on page 2-111
• #pragma diag_default tag[,tag,...] on page 4-61
• #pragma diag_error tag[,tag,...] on page 4-62
• #pragma diag_suppress tag[,tag,...]
• #pragma diag_warning tag[, tag, ...] on page 4-64
• Changing the severity of diagnostic messages on page 6-5 in the Compiler User
Guide.
4.6.7 #pragma diag_suppress tag[,tag,...]
This pragma disables all diagnostic messages that have the specified tags.
#pragma diag_suppress behaves analogously to #pragma diag_errors, except that the
compiler suppresses the diagnostic messages having the specified tags rather than
setting them to have Error severity.
Syntax
#pragma diag_suppress tag[,tag,...]
Where:
tag[,tag,...]
is a comma-separated list of diagnostic message numbers
specifying the messages to be suppressed.
See also
• --diag_suppress=tag[,tag,...] on page 2-47
• #pragma diag_default tag[,tag,...] on page 4-61
• #pragma diag_error tag[,tag,...] on page 4-62
• #pragma diag_remark tag[,tag,...] on page 4-62
• #pragma diag_warning tag[, tag, ...] on page 4-64
• Suppressing diagnostic messages on page 6-6 in the Compiler User Guide.
ARM DUI 0348C Copyright © 2007-2010 ARM. All rights reserved. 4-63
ID101213
Non-Confidential,