DECT Telephones Comfort Pro CM 500/510 (As of ... - Telekom

The Device Menu “Settings” Menu
126
LED indications: You can switch LED display on/off as desired (see also page 28).
Life indication: LED slowly flashing green or orange.
Incoming call: LED quickly flashing green or orange with incoming calls.
Coverage warning: Red LED flashing quickly when you leave the radio range of the
system.
Charge indication: LED lights up orange when the battery is charging, changing to
green when charging complete.
Info: Slowly flashing red LED, e.g. when there is a new entry on the caller list.
Handfree: Green LED lights up when the loudspeaker is on.
Appointment: Slowly flashing red LED when appointment signalled.
Alarm clock: Slowly flashing red LED when wake-up time signalled.
List access: The caller list and the redial list can be managed locally on the mobile unit or on the
communications system. The menu entries for the caller lists depend on the setting selected here.
This menu entry is only available when your mobile unit is checked into the Comfort Pro
communications system, see “System” Menu starting on page 107.
Redial: Decide whether the redial list is managed on the mobile unit (Local) or on the
communications system (PBX) (see also page 98).
Caller list: Decide whether the caller list is managed on the mobile unit (Local) or on the
communications system (PBX) (see also page 99).
Device options
Silent charging: The mobile unit does not signal any calls as long as it is on the charger. As
soon as you remove it, calls are signalled again. The calls are recorded on the caller list.
Silent charging does not apply to charging via the USB port.
Auto. key lock: When this function is active, the keypad lock is automatically switched on if you
do not use the device for more than 60 seconds.
Charger answer (charger): If this function is active, the mobile unit automatically accepts a
call when it is taken from the charger.