DECT Telephones Comfort Pro CM 500/510 (As of ... - Telekom
DECT Telephones Comfort Pro CM 500/510 (As of ... - Telekom
DECT Telephones Comfort Pro CM 500/510 (As of ... - Telekom
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Basic Functions Connections<br />
Blocked/Unblocked Call Numbers<br />
Your telephone can be blocked for all or for certain external call numbers. Emergency call numbers (110/112<br />
in Germany) can be placed on a special list – no matter what your external authorisation – and can thus be<br />
dialled at any time. <strong>As</strong>k your system administrator about it.<br />
Keypad Dialling<br />
Some European network operators require the keypad protocol in order to be able to set features. Depending<br />
on the system configuration, your telephone is automatically set to keypad dialling during a call. If not –<br />
before dialling – you have to switch your device and enter the codes stipulated by the network operator.<br />
These are then directly forwarded to the exchange and evaluated there. You usually receive an<br />
announcement in response. Please contact your system administrator if you have questions regarding this<br />
function.<br />
Now your telephone has been switched to the keypad protocol. Now you can enter the keypad codes.<br />
Note: This setting is deleted once again when the call is completed!<br />
N<br />
Least Cost Routing (LCR)<br />
For every outgoing external connection, the communications system automatically makes a connection – via<br />
LCR – to a network operator defined by the system administrator. If you do not use this preferred connection<br />
and for a single call would like to select a network operator yourself (call by call), switch LCR <strong>of</strong>f before<br />
making the call (please refer to the “LCR <strong>of</strong>f” menu entry in the Menu when Pre-dialling starting on page 63<br />
section).<br />
Note: The baby call and external call forwarding are not automatically conducted via<br />
N preferred connections. This is where you can prefix the codes <strong>of</strong> the desired network<br />
operator when entering the call number, when you wish to use a different network<br />
operator than the standard one.<br />
52