DECT Telephones Comfort Pro CM 500/510 (As of ... - Telekom

Programmable Functions Key Programming
Line x Assigns the key access to a selected trunk key of your
telephone.
Active features Assigns the key access to the Active features
menu entry of the system menu / main menu (see
page 100).
Reset key to default
If you have re-programmed a key and wish to reset it to the default function, press the softkey.
Alternative access to default functions
If you have re-programmed default functions, you have other options for accessing these functions.
Redial … long key press of call key
Navigation … by pressing the , , , keys
Menu … by pressing the
Menu.
end key and selection of
Note on assigning two functions to a softkey
If you have programmed a function to one of the softkeys and it is simultaneously assigned a standard
function, call the programmed function with a long key press.
Example: You have programmed the System menu function to the middle softkey (please refer to
page 133). During a call the mobile unit can be muted using this softkey; the symbol appears above the
softkey. You now have the following options:
■ Short key press: The mobile unit is muted.
■ Long key press: The system menu opens and shows the functions available during a call.
Special information regarding theVIP-List (assigned to the hotkey as the default setting)
You have to programme the key first before you can assign call numbers to the VIP-List. After calling it the first
time, enter the corresponding call number, the name and the melody so that the list becomes available to you.
135