DECT Telephones Comfort Pro CM 500/510 (As of ... - Telekom

Basic Functions Special Functions
Event
Man down, No movement, Escape
detected
Other alarm parameter settings
Alarm number: If the SOS emergency call number is predefined by the system, this menu entry does not
appear.
Comfort Pro system only: Always save the SOS emergency call number with the prefixed R-key
function (enquiry/hold). This means an emergency call is then also possible during a call. Press the
hash key 3 times to enter the R key function.
Other Systems: The “Hold” function may be generated using other codes on other systems. The
respective system documentation provides information on suitable programming.
Alarm auto answer: If the function is activated, any call is automatically accepted during Pre call. If the
function is deactivated and there is an incoming call during Pre alarm, or a call already being made,
the alarm call number is dialled after Pre alarm.
No matter what the setting, calls from the alarm call number or the SOS emergency call number are
automatically accepted and Pre alarm ended.
Alarm tone: Pre alarm can take place with/without an alarm tone on the mobile unit. When the alarm tone
is activated, it is signalled with increasing volume.
Repeat alarm: This is the time interval after which another Pre alarm including subsequent dialling of the
alarm call number is executed (e.g. because calling the alarm call number was cancelled by the
system).
Handsfree in alarm: You can configure whether an alarm call is done in handsfree or receiver operation.
This setting also applies to the emergency call via the SOS emergency call key.
48
Delay Pre alarm
with/without alarm
tone on the mobile unit
Dialling of the
alarm call number