DECT Telephones Comfort Pro CM 500/510 (As of ... - Telekom
DECT Telephones Comfort Pro CM 500/510 (As of ... - Telekom
DECT Telephones Comfort Pro CM 500/510 (As of ... - Telekom
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
The Device Menu “Security” Menu<br />
“Security” Menu<br />
You have to enter the device PIN to open the Security menu. The default is “0000” (4 digits <strong>of</strong> 0 (zero)).<br />
Phone lock: The telephone is locked. Now only incoming calls can be accepted. A programmed<br />
emergency call key or the SOS key can still be used on the <strong>Comfort</strong> <strong>Pro</strong> <strong>CM</strong> <strong>510</strong>. To remove the<br />
telephone lock, see page 39.<br />
Change PIN: Change the device PIN for the Security menu. Enter the new PIN and then re-enter the new<br />
PIN once more.<br />
SOS number: Enter the destination call number for an emergency call. This emergency call number is<br />
dialled when the SOS key is pressed (<strong>Comfort</strong> <strong>Pro</strong> <strong>CM</strong> <strong>510</strong>), when a programmed emergency call key<br />
is pressed or via the alarm sensor (<strong>Comfort</strong> <strong>Pro</strong> <strong>CM</strong> <strong>510</strong>, if no alarm call number is programmed).<br />
Alarm sensor: (<strong>Comfort</strong> <strong>Pro</strong> <strong>CM</strong> <strong>510</strong> only) Please read the description <strong>of</strong> the alarm sensor on page 46<br />
before making configurations.<br />
128<br />
Alarm number: If the SOS number is predefined by the system, this menu entry does not appear.<br />
Enter the alarm call number to be dialled when there is a sensor alarm.<br />
<strong>Comfort</strong> <strong>Pro</strong> system only: You can prefix the call number with the R key function (enquiry) by<br />
pressing the key 3 times. This means an emergency call is then also possible during a<br />
call.<br />
Other Systems: The “Hold” function may be generated using other codes on other systems.<br />
The respective system documentation provides information on suitable programming.<br />
Alarm auto answer: You can configure whether a call from any call number is automatically<br />
answered during a prealarm. No matter what the setting, calls from the alarm call number or<br />
the SOS emergency call number are automatically accepted and prealarm ended.<br />
Alarm tone: Prealarm can take place with/without an alarm tone on the mobile unit. When the<br />
alarm tone is activated, it is signalled with increasing volume.<br />
Handsfree in alarm: You can configure whether an alarm call is done in handsfree or receiver<br />
operation. This setting also applies to the emergency call via the SOS/emergency call key.
Change language