DECT Telephones Comfort Pro CM 500/510 (As of ... - Telekom

“Security” Menu The Device Menu
Pre alarm: You can set the time interval to go by until the emergency call number is dialled. During
this time,there is a ring tone (alarm tone) signalled at increasing volume (unless deactivated).
During the prealarm, the alarm can still be cancelled (Off, 10 sec … 60 sec).
Repeat alarm: This is the time interval after which another prealarm including subsequent dialling
of the alarm call number is executed, e.g. because calling the alarm call number was
cancelled (Off, 5sec… 240sec).
Mandown alarm
Status: Shows whether mandown alarm is switched on or not. Press the Edit softkey to
switch on or off.
Delay: You can define the time how long the device is allowed to be out of the vertical
position without triggering a prealarm (1 sec … 60 sec).
No movement alarm
Status: Shows whether no movement alarm is switched on or not. Press the Edit softkey
to switch on or off.
Delay: You can define the time how long the device is allowed to be motionless without
triggering a prealarm (10 sec … 60 sec).
Sensibility: Set sensitivity (Low, Medium, High). This enables you to adapt the sensor to
various movements (e.g. manner of walking) of the supervisory personnel.
Escape alarm
Status: Shows whether escape alarm is switched on or not. Press the Edit softkey to
switch on or off.
Delay: You can define the time how long the device is allowed to be moved quickly without
triggering an alarm (10 sec … 60 sec).
Sensibility: Set sensitivity (Low, Medium, High). This enables you to adapt the sensor to
various movements (e.g. manner of running) of the supervisory personnel.
129