DECT Telephones Comfort Pro CM 500/510 (As of ... - Telekom
DECT Telephones Comfort Pro CM 500/510 (As of ... - Telekom
DECT Telephones Comfort Pro CM 500/510 (As of ... - Telekom
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Mobile Unit Subscription (Checking In) Commissioning<br />
4. Enter PARK: Now enter the communications system PARK. The PARK (Portable Access Right Key)<br />
identifies the communications system. You can view this number in the communications system<br />
Configurator. Press the Next s<strong>of</strong>tkey.<br />
If there are no other communications systems within radio range and you have activated simplified<br />
registration on the communications system, you can continue without entering a PARK.<br />
The mobile unit begins checking in and displays Subscription: Please wait. This procedure should<br />
be completed very quickly. If not, the entries may not be correct or the radio connection is inadequate. In this<br />
case, cancel the procedure using the Esc s<strong>of</strong>tkey and repeat the registration with corrected entries. After<br />
completion <strong>of</strong> checking in, the mobile unit is ready for operation.<br />
The following applies to other manufacturers’ communications systems:<br />
Register your mobile unit with the communications system as described in the manufacturer manual.<br />
Registration<br />
Anytime the mobile unit is checked in/registered with a communications system, this registration is saved on<br />
the device. A registration entry includes a system name.<br />
When you have checked onto the system with your mobile unit, the system name appears on the display. You<br />
can change the registration entry data as needed. To do so, call the > System > Subscriptions<br />
menu. Select the desired registration entry and change the data (please refer to page 107)<br />
Checking In<br />
After the mobile unit has been registered on one or more communications systems, you can make calls. If you<br />
have activated the Auto Search feature (see page 107), the mobile unit (when idle) will automatically select<br />
the closest available system and check in there. If you do not wish to use the Auto Search feature, you can<br />
execute an exclusive search for a desired system based on the saved registration entries.<br />
23