DECT Telephones Comfort Pro CM 500/510 (As of ... - Telekom
DECT Telephones Comfort Pro CM 500/510 (As of ... - Telekom
DECT Telephones Comfort Pro CM 500/510 (As of ... - Telekom
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Ending a Call Telephoning<br />
Ending a Call<br />
If the subscriber you are speaking to ends the call, the busy signal for your telephone is switched <strong>of</strong>f after a<br />
few seconds and you can be reached again. This also applies when you are connected via headset. The time<br />
interval until the busy signal is switched <strong>of</strong>f is configured by the system administrator. All other connections<br />
are ended after 20 seconds when the receiver is not replaced.<br />
Accepting Calls<br />
Calls are ended by pressing the end key briefly.<br />
When there is an incoming call, an event window with information on the call appears on the display and the<br />
display illumination is switched on.<br />
… or<br />
optional:<br />
… or<br />
Press the call key.<br />
When Auto answer” is activated (see page 126) – remove the mobile unit from the<br />
charging station<br />
The ring tone and/or vibration alarm are switched <strong>of</strong>f, you can, however, still accept<br />
the call.<br />
Reject / Press s<strong>of</strong>tkey (alternatively: end key) The call is rejected. The caller hears the busy<br />
signal.<br />
… or<br />
Press s<strong>of</strong>tkey briefly and select one <strong>of</strong> the menu entries <strong>of</strong>fered, please refer to<br />
Incoming Call Menu starting on page 69<br />
67