[MS-ASCMD]: ActiveSync Command Reference Protocol Specification

The following synchronization request specifies that up to 100 changes be sent from the server back
to the client. If there are more than 100 changes on the server, the MoreAvailable element is
included in the response.
Request
Email
1
1
100
2.2.4 Common Status Codes
The status codes returned for each command are specified in the Status element (section
2.2.3.152) section corresponding to each command. Links to the Status element sections are listed
in the following table.
Command
Status element section
Autodiscover (section 2.2.2.1) Section 2.2.3.152.1
FolderCreate (section 2.2.2.2) Section 2.2.3.152.2
FolderDelete (section 2.2.2.3) Section 2.2.3.152.3
FolderSync (section 2.2.2.4) Section 2.2.3.152.4
FolderUpdate (section 2.2.2.5) Section 2.2.3.152.5
GetItemEstimate (section 2.2.2.7) Section 2.2.3.152.6
ItemOperations (section 2.2.2.8) Section 2.2.3.152.7
MeetingResponse (section 2.2.2.9) Section 2.2.3.152.8
MoveItems (section 2.2.2.10) Section 2.2.3.152.9
Ping (section 2.2.2.11) Section 2.2.3.152.10
Provision (section 2.2.2.12) [MS-ASPROV] section 3.1.5.2
ResolveRecipients (section 2.2.2.13) Section 2.2.3.152.11
Search (section 2.2.2.14) Section 2.2.3.152.12
SendMail (section 2.2.2.15) Section 2.2.3.152.13
Settings (section 2.2.2.16) Section 2.2.3.152.14
SmartForward (section 2.2.2.17) Section 2.2.3.152.15
SmartReply (section 2.2.2.18) Section 2.2.3.152.15
Sync (section 2.2.2.19) Section 2.2.3.152.16
258 / 369
[MS-ASCMD] — v20110315
ActiveSync Command Reference Protocol Specification
Copyright © 2011 Microsoft Corporation.
Release: Tuesday, March 15, 2011