[MS-ASCMD]: ActiveSync Command Reference Protocol Specification

4.5.3 Uploading New ApplicationData to the Server
The following sections show how a client uploads new application data to the server by using the
Sync command (section 2.2.2.19).
4.5.3.1 Request
The following example shows the Sync command request (section 2.2.2.19.1) sent from the client
to the server to add a contact.
…
123
anat@fourthcoffee.com
Anat
W
Kerry
Sr Marketing Manager
…
4.5.3.2 Response
The following example shows the Sync command response (section 2.2.2.19.2) sent from the
server to the client. The response shows that the synchronization was successful and that the new
item from the client, identified by the airsync:ClientId element (section 2.2.3.27.2), was added to
the collection on the server. The server also assigns a permanent ID for the newly added item in the
airsync:ServerId element (section 2.2.3.141.6). After the client receives a successful response,
the client uses this server ID for any future airsync:Change (section 2.2.3.23) or airsync:Delete
(section 2.2.3.40.2) commands for this item.
…
123
4:1
1
…
[MS-ASCMD] — v20110315
ActiveSync Command Reference Protocol Specification
Copyright © 2011 Microsoft Corporation.
Release: Tuesday, March 15, 2011
282 / 369