[MS-ASCMD]: ActiveSync Command Reference Protocol Specification

2.2.2.10 MoveItems
The MoveItems command moves an item or items from one folder on the server to another.
The item to be moved is identified by its server ID in the MoveItems command request (section
2.2.2.10.1). The source and destination folders are also identified by their server IDs in the
command request. The MoveItems command response (section 2.2.2.10.2) shows the status of the
move, the message that was moved, and the new message ID.
When items are moved between folders on the server, the client receives Delete (section 2.2.3.40)
and Add (section 2.2.3.7) operations the next time the client synchronizes the affected folders.
An item that has been successfully moved to a different folder can be assigned a new server ID by
the server.
The Move namespace is the primary namespace for this section. Elements referenced in this section
that are not defined in the Move namespace use the namespace prefixes defined in section 2.2.1.
The following table lists the elements that are used in MoveItems command requests and
responses.
Element Scope Reference
MoveItems Request and Response section 2.2.3.102
Move Request section 2.2.3.100.2
SrcMsgId Request and Response section 2.2.3.150
SrcFldId Request section 2.2.3.149
DstFldId Request section 2.2.3.47.2
Response Response section 2.2.3.130.4
Status Response section 2.2.3.152.9
DstMsgId Response section 2.2.3.48
2.2.2.10.1 Request
The following code shows the XSD [XMLSCHEMA1] for the MoveItems command request.
[MS-ASCMD] — v20110315
ActiveSync Command Reference Protocol Specification
Copyright © 2011 Microsoft Corporation.
Release: Tuesday, March 15, 2011
46 / 369