[MS-ASCMD]: ActiveSync Command Reference Protocol Specification

call or the same property appears in the Settings request more than once. The server will return
responses in the same order in which they were requested.
Each response message contains a Status element (section 2.2.3.152.14) value for the command,
which addresses the success or failure of the Settings command, followed by Status values for
each of the changes made to the Oof, DeviceInformation, DevicePassword or
UserInformation elements.
The Status node MUST indicate success if the Settings response contains property responses. If
the command was not successful, the processing of the request cannot begin, no property responses
are returned, and the Status node MUST indicate a protocol error.
Any error other than a protocol error is returned in the Status elements of the individual property
responses. All property responses, regardless of the property, MUST contain a Status element to
indicate success or failure. This Status node MUST be the first node in the property response.
The Settings namespace is the primary namespace for this section. Elements referenced in this
section that are not defined in the Settings namespace use the namespace prefixes defined in
section 2.2.1.
The following table lists the elements that are used in Settings command requests and responses.
Element Scope Reference
Settings Request and Response section 2.2.3.143.2
RightsManagementInformation Request and Response section 2.2.3.133
Get Request and Response section 2.2.3.71
Oof Request and Response section 2.2.3.104
BodyType Request and Response section 2.2.3.16
Set Request section 2.2.3.142
OofState Request and Response section 2.2.3.106
StartTime Request and Response section 2.2.3.151.2
EndTime Request and Response section 2.2.3.55.2
OofMessage Request and Response section 2.2.3.105
AppliesToInternal Request and Response section 2.2.3.13
AppliesToExternalKnown Request and Response section 2.2.3.11
AppliesToExternalUnknown Request and Response section 2.2.3.12
Enabled Request and Response section 2.2.3.53
ReplyMessage Request and Response section 2.2.3.126
DevicePassword Request and Response section 2.2.3.44
Password Request section 2.2.3.113.3
DeviceInformation Request and Response section 2.2.3.43
[MS-ASCMD] — v20110315
ActiveSync Command Reference Protocol Specification
Copyright © 2011 Microsoft Corporation.
Release: Tuesday, March 15, 2011
69 / 369