You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
HITCHES<br />
HEIGHT ADJUSTMENT OF LIFTING<br />
PULL RODS<br />
Lifting pull rod see fig. (A):<br />
Perform adjustment by turning of the eye<br />
(1) after disconnection of the upper end of<br />
the lifting pull rod.<br />
Lifting pull rod see fig. (B):<br />
Pull out the arm cross (2) in direction of<br />
the arrow and perform adjustment by<br />
turning of the arm cross.<br />
According to equipment of the tractor<br />
both pull rods can be arranged as shown<br />
on fig. (B)<br />
E453 E454 E455<br />
FIXED AND FREE POSITION OF<br />
LOWER HYDRAULIC PULL RODS<br />
Fixed position of lower hydraulic pull<br />
rods see fig. (A):<br />
The pin head (1) and washer (2) are<br />
mounted horizontally.<br />
Free position of lower hydraulic pull rods<br />
see fig.(B):<br />
The pin head (1) and washer (2) are<br />
mounted vertically.<br />
Free position allows free coupling of the<br />
tractor and implement. Both ends of the<br />
pull rods may move freely each other in<br />
this case.<br />
LIMITING PULL RODS<br />
The limiting pull rods (1) allow side<br />
swings of the lower pull rods.<br />
The left and right limiting pull rods can be<br />
adjusted by turning of the pull rod pipe,<br />
see the arrow.<br />
Both limiting pull rods shall always<br />
be mounted on the tractor.<br />
107