You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DRIVING<br />
E209<br />
HEATER OF COOLING FLUID<br />
It is installed on the right side of the engine<br />
block.<br />
Power: 1000W<br />
Voltage: 220V<br />
E210a<br />
STARTING OF THE ENGINE USING HEATER OF COOLING FLUID<br />
Heating of cooling fluid facilitates starting of the engine at low temperatures. Power<br />
supply installation and its protection against dangerous contact shall be made according<br />
to the applicable regulations.<br />
1. First insert the plug into the heater.<br />
2. Then connect the heater to the power supply mains with voltage 220V.<br />
For reduced wearing of the engine with its starting at low temperatures, the manufacturer<br />
recommends use of the heater. Time of heating depends on the ambient temperature<br />
(1 to 2 hours before the expected starting is sufficient).<br />
After end of heating first disconnect the device from the power supply mains<br />
and then unplug the cable from the heater!<br />
Risk of injury from electric shock!<br />
It is necessary to instruct operators of the tractor and ensure regular revisions<br />
of the cooling fluid heater including power supply cable according<br />
to the applicable standards of the country where the tractor is operated,<br />
at least before each winter season.<br />
54
Change language