You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DRIVE OF FARMING MACHINES<br />
REAR OUTPUT SHAFT – SHIFTING<br />
OF DEPENDENT AND INDEPENDENT<br />
SPEED OF THE SHAFT<br />
Shifting is performed by the lever (1)<br />
when the tractor is in standstill.<br />
a - Independent speed of the output<br />
shaft (rpm of the shaft depends<br />
on rpm of the engine)<br />
n - Neutral position. Use this position<br />
to facilitate connection of the<br />
farming mechanism propeller<br />
shaft. The terminal of the rear<br />
output shaft is freely rotable.<br />
B - Dependent speed of the output<br />
shaft (rpm and direction of rotation<br />
depends on the engaged gear and<br />
position of reversing lever).<br />
G154 G153 E356<br />
REAR OUTPUT SHAFT – SHIFTING<br />
OF SPEED OF THE OUTPUT SHAFT<br />
540 AND 1,000 OR 540E RPM<br />
Shifting is performed by the lever (1)<br />
when the tractor is in standstill.<br />
The tractor is equipped standardly with a<br />
combination of 540 and 1,000 rpm of the<br />
output shaft; other optional combination<br />
is 540 and 540E rpm of the output shaft.<br />
a - 1,000 min -1 or 540E min -1<br />
b - 540 min -1<br />
Shifting of 540 and 1,000 (or<br />
540E) min -1 is possible regardless<br />
to the number of splines of the<br />
installed terminal. Speed of the<br />
output shaft and type of terminal<br />
shall be chosen depending on<br />
the prescribed rpm of the coupled<br />
mechanism.<br />
83<br />
FRONT OUTPUT SHAFT<br />
The front output shaft is equipped with a<br />
fixed terminal with 6 or 21 splines and its<br />
speed in 1,000 min -1 .<br />
The tractor may be equipped upon request<br />
by a front output shaft with different<br />
directions of rotation:<br />
a - In direction of rotation of the<br />
engine (standard)<br />
b - Against direction of rotation of the<br />
engine ( upon request)