Untitled

MAINTENANCE INSTRUCTIONS
OPENING OF FRONT BONNET
Opening of the bonnet:
Unlock the bonnet by pressing of the
pushbutton (1); grasp it in places of the
arrows and lift it.
The bonnet is hold in lifted position by a
gas-fluid strut.
Closing of the bonnet:
Grasp the bonnet in places of the arrows;
pull it downwards until the lock
clicks.
Rapid closing of the bonnet may
damage filaments of bulbs in
headlights in the front mask.
G701 E702 E703
CHECK OF ENGINE OIL LEVEL
Check oil level every day, before start of
operation, on the tractor standing on a
horizontal surface. The oil gauge rod (1)
and filling hole (2) are located on the
right side of the engine. Screw out the
gauge rod (1), wipe it with a cloth and
screw in. After re-screwing it out the oil
level shall not be under the lower gauge
mark. Refill oil through the filling hole as
necessary (2).
DISCHARGE OF ENGINE OIL
1. Screw out the drain plug (1), the best
immediately after a drive or warmingup
of the engine to its operating temperature.
2. Discharge oil.
3. Clean the drain plug.
4. Screw the drain plug (1) into the hole.
155